12 Pcs/lot 1x to 16x Express Extender Riser Card Usb 3.0 Pcie

1. Model:PCE164P-N03 VER006C2. Brand new and high quality3. Safer, more efficient, more practical4. 6PIN adapter 12V DC-DC to strengthen the power supply, the Image card power supply independent from the motherboard, which to reduce the burden on the motherboard when connect multi-Image card5.Image card power supply with four solid capacitors, Image card power supply more stable and secure.6. Solve the problem that welding point fragile burn, transmission signal attenuation, platoon line length is not enough and so on7. Slots with fixed card buckle, remove the Image card and the fixed Image, the Image card will not fall off from the slot8. PCI-E connector with multi-layer shielded wire, the longest can connect 3 Meters the signal will not attenuateNote:1. This extension is applicable to the mainboard PCI - E slot (1 x 2 x, 4 x 8 x 16 x). Please plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.2. The form a complete set of wire rod is customized, never grab line to plug in. Remember that 3. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.4. Dual-core Image Suggestions with the old line, the mainboard is 16 x also recommends using the old row line Specifications:Power Connector: 6 pin power cableCompatible use: with any Image cardsColour:BlueMaterial:PC + metalSize:13cm x 4.4cm x 1.2cmPackage Contents:12 x PCI-E 16X adapter12 x PCI-E 1X riser board12 x USB3.0 cable12 x 15Pin-6Pin Power cableOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.