6Y880 Spot Welder Energy Storage Control Board Adjusts the Time Current Digital Display Spot Welder

Features:

Model: CPSMC6Y880

Size: 50mm x 90mm

Language: English and Chinese

Input voltage: 12V to 19V

Powered: Above 72W (Calculation formula example 12VX6A=72W, then 14V/16V/19V is the same, the voltage multiplied by the current is equal to how many W)

You can set the voltage you want to spot weld different nickel pieces perfectly. If the current is too large, you can reduce the voltage to control the current. It can weld different nickel pieces very firmly. The encoder switch can be extended. If the shell is installed, the function key can be extended to the position you like. You can press it as you want. It doesn`t need to step down or boost voltage. It can be used directly. Many people buy second-hand capacitors without balanced charging, so they can`t balance the capacitors independently. Therefore, they can only choose low-cost series charging to solve this charging problem. However, the disadvantage of series charging is that the voltage of two capacitors is inconsistent, which will lead to unsatisfactory spot welding effect and discharge at the same time Strong, one side weak, because a voltage may be 2.3V, one may be 2.7V. If the current is unstable, the spot welding effect will not play out. Some people will add an equalizer, but the equalizer can only work on the consistency. If the consistency is not good, it will also lead to very dangerous overcharge.

The control board does not cover everyone`s success or how thick it can be. This has nothing to do with the control board. The thickness of the spot welding is determined by the actual situation rather than by the control board. How to do the spot welding effect to have good effect? First of all, the internal resistance of capacitor, the internal resistance of connecting piece, the total internal resistance of MOS board and tube Spot welding pen, line spot welding needle, this is a whole, if there is a problem in a link will affect the effect of spot welding, some people ask, how thick can you spot copper? You have to ask yourself this question. Some people can`t even spot weld 0.1, while others can spot weld 0.3 copper, so the final effect comes to you.

Package Included:

1 x?6Y880 Spot Welder Control Board?

1 x Fan

1 x?Copper Pillar

1 x Screw

Detail Pictures: