V02h2-1 V1.5 Hh Elm327 Bluetooth 2.0 Obd2 Scanner Hh Elm 327

2 set Auto parts:2 x headlight switch cover sticker & 1 x Mini OBD2 Bluetooth 2.0 ScannerMini OBD2 Bluetooth Scanner Functions:1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).2: Clear trouble codes and turn off the MIL ("Check Engine" light);3: Display current sensor data, including:;4: Engine RPM;5: Calculated Load Value;6: Coolant Temperature;7: Fuel System Status;8: Vehicle Speed9: Short Term Fuel Trim;10: Long Term Fuel Trim;11: Intake Manifold Pressure;12: Timing Advance;13: Intake Air Temperature;14: Air Flow Rate;15: Absolute Throttle Position;16: Oxygen sensor voltages / associated short term fuel trims;17: Fuel System status;18: Fuel Pressure;19: Many othersMini OBD2 Bluetooth Scanner for Multi-brands CAN-BUS as same as ELM327 Bluetooth. Supports All OBD2 Protocol works on Android Symbian, used to read diagnostic trouble codes, both generic and manufacturer-specific, and display your meaning (over 3000 generic code definitions in the database).Mini OBD2 Bluetooth Scanner for Multi-brands CAN-BUS as same as ELM327 Bluetooth.Supported protocols: 1.SAE J1850 PWM (41.6Kbaud) 2.SAE J1850 VPW (10.4Kbaud) 3.ISO9141-2 (5 baud init, 10.4 Kbaud) 4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)5.ISO14230-4 KWP (fast init, 10.4 Kbaud)6.ISO15765-4 CAN (11bit ID, 500 Kbaud)7.ISO15765-4 CAN (29bit ID, 500 Kbaud) 8.ISO15765-4 CAN (11bit ID, 250 Kbaud) 9.ISO15765-4 CAN (29bit ID, 250 Kbaud)Top 4 Reasons to Get Mini OBD2 Bluetooth Scanner: 1. Software Version: V2.1 (depending on software) 2. Hardware Version: V1.5. 3. Works with all OBD-II compliant vehicles. 4. Wireless (Bluetooth)Enhances both style and performanceDesigned exclusively for car Sedan/SUVManufactured using premium-grade materialsEasy to instal, followingthe instruction you can install them inWorking Current: 35mAStandby Current: 25mAOperating temperature: -40 - 85 Working Humidity: less than 60%Size: 45mm x 25mm x 65mmCompatible software:Window : ScanMaster-ELM, ScanTool.net, PCMSCAN ELM, etc.Installation method:1) Clean the surface, keep dry and clean.2) Paste and install.(there were auto adhesive glue in the trim back)3) Please press hard especially on the edges at least 2 mins after installing.4) Using hair dryer(hot air blowing) in cold weather.5) Please keep away from water and keep dry after been installed within 72 hours/3 days.Color: silver+BlackMaterial: aluminium alloy+chipVehicle Specific:for Mercedes Benz A Class W176for Mercedes Benz B Class W246for Mercedes Benz C Class W204 2008-2014for Mercedes Benz E Class W212 2008-2015for Mercedes Benz GLA GLK GL ML X204Package Contents:2 x headlight switch cover sticker1 x Mini OBD2 Bluetooth 2.0 Scanner1 x BoxOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.